Search found 41 matches
- 9 years ago
- Forum: General Technical
- Topic: Parts Listing
- Replies: 25
- Views: 54401
Re: Parts Listing
brembo parts list. with this you can see what other bikes share the same brake components replacement brake pistons and seals are available from here http://www.bikersjersey.com/?year=2003&modeltype=200&model=%20972234&schematic=C03587132 the KTM 640DUKE II uses the same left hand calipe...
- 9 years ago
- Forum: V-Raptor and Xtra
- Topic: brembo calipers
- Replies: 7
- Views: 10023
Re: brembo calipers
after hours of searching i found the caliper ref numbers 20.6800.10 left hand, 20.6800.20 right hand, the rear is 20.6951.51 , rear master cylinder is 10.4776.53. the front calipers are the same as fitted to most of the ducati monster range
for future reference
for future reference
- 9 years ago
- Forum: V-Raptor and Xtra
- Topic: brembo calipers
- Replies: 7
- Views: 10023
Re: brembo calipers
thanks miz thats great , i also need the pistons aswell
- 9 years ago
- Forum: V-Raptor and Xtra
- Topic: brembo calipers
- Replies: 7
- Views: 10023
brembo calipers
does anyone know the model type of the front brembo calipers fitted to the 1000 vraptor . or the ref code of the piston and seal rebuild kit .my pistons are pitted and the seals are fooked and i need to fix them quickly
thanks
thanks
- 9 years ago
- Forum: Raptor 1000
- Topic: pcII maps
- Replies: 4
- Views: 3372
Re: pcII maps
thanks bazzywazz, got them now ,what setup have you got and which map do you use?
- 9 years ago
- Forum: Raptor 1000
- Topic: pcII maps
- Replies: 4
- Views: 3372
Re: pcII maps
thanks ozzraptor ,if you can email me those that would be great. do you need me to private msg you my email address?
- 9 years ago
- Forum: Raptor 1000
- Topic: pcII maps
- Replies: 4
- Views: 3372
pcII maps
hello, is anyone willing to share their pcII maps, i can only find these from dynojet Stage1 Stock Exhaust Stock Filter Pump fuel std. green 95 octane Stage2 Stock Exhaust K&N Filter FBF Forza Racing Mufflers K&N Filter there must be many more , i have just fitted a pair of SHORT TITANIUM ca...
- 10 years ago
- Forum: Raptor 1000
- Topic: Clutch cable snapped, where can I get one? :(
- Replies: 22
- Views: 11078
Re: Clutch cable snapped, where can I get one? :(
a tl1000s clutch cable will fit ,ive just fitted one to my standard vrap 1000 today. the nipple at the lever end is slightly smaller so add the little plastic bit from your old one to take up the looseness,also there is a 90 degree bend on the tl cable up at the bars which needs gently easing back t...
- 10 years ago
- Forum: General Technical
- Topic: LED headlight bulb
- Replies: 11
- Views: 5232
Re: LED headlight bulb
Ooh, that is very purdy! :thumbsup: I don't ride at night, and I run with my headlight off during the day (for a Top Secret reason!), so I can't justify the expense of flash lighting, but I have swapped the parking light globe for an LED one, and the white light from that is much nicer than the yel...
- 10 years ago
- Forum: General Technical
- Topic: LED headlight bulb
- Replies: 11
- Views: 5232
Re: LED headlight bulb
led lights , main ,park,off
- 10 years ago
- Forum: General Technical
- Topic: LED headlight bulb
- Replies: 11
- Views: 5232
Re: LED headlight bulb
i will try to get a picture of it by the weekend (correction 6 left 6 right 3 above)
- 10 years ago
- Forum: General Technical
- Topic: LED headlight bulb
- Replies: 11
- Views: 5232
Re: LED headlight bulb
http://www.raptorchapter.org.uk/viewtopic.php?f=11&t=4048 How is the led light going , no blown bulb yet ? I would think they should last a long time. Hmmm another job to do ! Is it a straight out plug and play, no splicing of wiring ? Did you do the small parker at the front as well, they are ...
- 10 years ago
- Forum: General Technical
- Topic: led headlight
- Replies: 10
- Views: 4936
Re: led headlight
do they have 2 leds on each? or are they like some hids with a moving holder? Also be careful as my hid required a little modding on the elefant to get the holder to fit as it is a little larger than the holder but there should be enough room on the raptor. they do have 2 leds , 1 for low beam 1 fo...
- 10 years ago
- Forum: General Technical
- Topic: LED headlight bulb
- Replies: 11
- Views: 5232
- 10 years ago
- Forum: V-Raptor and Xtra
- Topic: 2 into 1 exhaust
- Replies: 11
- Views: 5959
Re: 2 into 1 exhaust
thanks to everyone for the comments , the loss of low end grunt when fitting a 2-1 is something i can do without