brembo calipers

[1add2]

does anyone know the model type of the front brembo calipers fitted to the 1000 vraptor . or the ref code of the piston and seal rebuild kit .my pistons are pitted and the seals are fooked and i need to fix them quickly

thanks

[Miz]

Seal kit on e-bay

http://www.ebay.co.uk/itm/181589235536? ... EBIDX%3AIT

Hope that helps.

[1add2]

thanks miz thats great , i also need the pistons aswell

[Crap Tartan]

I have the front brembo brakes complete from mine unused for years as I fitted an R1 front end on mine. Any use?

[1add2]

after hours of searching i found the caliper ref numbers 20.6800.10 left hand, 20.6800.20 right hand, the rear is 20.6951.51 , rear master cylinder is 10.4776.53. the front calipers are the same as fitted to most of the ducati monster range
for future reference

[asdean]

Hi there,
Ural motorcycles had brembo's fitted to some models in Australia.
there is a fairly comprehensive manual available which explains brembo caliper repair in detail.
http://cvkustoms.com/PDF/Brembo_Disc_Brakes.pdf
of course there is lots of other stuff but it's the only place that I have found that lists part numbers and explains caliper rebuild in detail,
The 1000 manual also helps with torque valves.
cheers
Al

[Pomegranate]

That's the right Caliper.

Has anybody measured the length of the pistons while out of their calipers and consider aftermarket generic pistons?

[Pomegranate]

And by "right", I mean 'correct', as it's a left caliper. Mounted on the right. Right?