RSV swingarm issues - need help!
Posted: |September 17th, 2019|, 9:11 pm
G'day all,
I have recently installed an RSV swingarm into my Raptor in a hurried attempt to get to MotoGp at Phillip Island. I have a couple of questions regarding the swap because of a few issues that have come up and need some help.
Should the shocky be the same length as the standard sachs? I have installed a Bitubo shocky which was 10mm longer out of the box than standard and I used the standard Cagiva triangles. The ride height is now very high (feels like a GSXR etc) and causes the swingarm to hit on the left pipe. It doesn’t seem to have have any sag and I’m concerned about any issues all this will have on the bikes handling.
The Bitubo schocky has a lot of adjustment in the rose joints at each end, I just need to have a benchmark to work from.
Another issue all this causes is that the side stand is now way too short. Will the side stand still need modification when the ride height is correct?
Does anyone have dimensions that will help?
I desperately need help to get this thing on the road asap, so I hope someone out there can help!!
Cheers from Boofhead
I have recently installed an RSV swingarm into my Raptor in a hurried attempt to get to MotoGp at Phillip Island. I have a couple of questions regarding the swap because of a few issues that have come up and need some help.
Should the shocky be the same length as the standard sachs? I have installed a Bitubo shocky which was 10mm longer out of the box than standard and I used the standard Cagiva triangles. The ride height is now very high (feels like a GSXR etc) and causes the swingarm to hit on the left pipe. It doesn’t seem to have have any sag and I’m concerned about any issues all this will have on the bikes handling.
The Bitubo schocky has a lot of adjustment in the rose joints at each end, I just need to have a benchmark to work from.
Another issue all this causes is that the side stand is now way too short. Will the side stand still need modification when the ride height is correct?
Does anyone have dimensions that will help?
I desperately need help to get this thing on the road asap, so I hope someone out there can help!!
Cheers from Boofhead