air fuel sensor
Posted: |August 8th, 2019|, 9:34 pm
I have recently purchase a Bosch air fuel wide band sensor and display and was wondering if any-one has fitted one to a 650 raptor.
It is supposed to be fitted depending upon sites 18 to 24 " past the exhaust port.
This pretty much puts it at the balance pipe join and its very hard to see a point that will meet the +/- 60 degrees from vertical requirement.
Trying to solve a mostly second gear under 3/4 acceleration "lean out" hesitation 4500 to 5000 rpm that is worse when cold,
any thoughts, it wasn't there two years ago.
cheers
AL
It is supposed to be fitted depending upon sites 18 to 24 " past the exhaust port.
This pretty much puts it at the balance pipe join and its very hard to see a point that will meet the +/- 60 degrees from vertical requirement.
Trying to solve a mostly second gear under 3/4 acceleration "lean out" hesitation 4500 to 5000 rpm that is worse when cold,
any thoughts, it wasn't there two years ago.
cheers
AL