Raptor Chapter

I have just replaced the headlamp unit, bowl and light, on my 2002 650 Raptor. The old bowl was fragmented and held together with duck tape.The replacement was £33.00 from ebay and i tranferred the wiring from the original to the new. I used the new side light as the carrier was different butthis only involved soldering two wires. The side mounting nuts were also transferred and secured with polyurethane mastic and spacing washers. The lamp is a cheap chinese thing but is solid enough, works and fits.
Seller, in-2-Motorbikes
UN-IVERSAL 7 INCH HEADLIGHT
WITH GLASS LENS
Halogen H4 12V60/55W
SIDE LIGHT 12V CAPLESS orange glass
dimensions:
147 mm Across the lens only
180mm Across the whole front
131mm Deep not including the lens
190mm High
Centre Beam
Others sell the same light

Hi Jim,

Could you please give a seller's reference code for this unit, in case I need to change the cheapo headlamp I fitted to my 1K which is already showing signs of reflector corrosion? I've found problems with matching the spacing between brackets on replacements (the original had long-gone when I got the bike) and I really don't like fitting supplementary brackets. Also, I've had to heat-gun the shell to get clearance for the speedo cable etc.

Cheers,

Nick