12 Volts - Gear Indicator - Paging Ozzraptor!!!
Posted: |May 14th, 2017|, 3:29 am
Hello, trying to fit a GIPro gear indicator to the bike, failing 
Need a 12 Volt wire that's switched with the ignition but stays on with the kill switch.
There's a tiny review from Ozzraptor on the GIPro site so I guess he's fitted one OK - how did you do it?
Instructions say use brake light +ve but none of the contacts on the rear brake light give 12V unless brake light is on.
Help please!!
Need a 12 Volt wire that's switched with the ignition but stays on with the kill switch.
There's a tiny review from Ozzraptor on the GIPro site so I guess he's fitted one OK - how did you do it?
Instructions say use brake light +ve but none of the contacts on the rear brake light give 12V unless brake light is on.
Help please!!
Have you tried the different tre settings, i set mine for 5th gear but i really could not tell much difference in the settings seat of pants dyno 