Awesome thanks , so i just finished the block off plates. The rear plate nuts are accessable using a 1/4" drive universal joint with 10mm socket from next to the shock absorber. When fitting the plate i used sealant on the plate and guided it into place with the use of two screwdrivers. One through the hole and the other to spin the plate around and over the locating bolts. You dont need small fingers or hands, just the skill of a surgeon to locate the plate over the boltsshedmonkey wrote:55 years agoyes
PAIRS removal
Re: PAIRS removal
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: PAIRS removal
very true the rear one is tricky ,patience is required ,glad it went ok
Bit of a Muppet
Re: PAIRS removal
Does removing PAIRS make a big difference how bike runs ?
Don't ride faster than your angels can fly !