vrap 1000 wiring diagram
vrap 1000 wiring diagram
does anyone have a clear readable wiring diagram? i have seen many including the one in this forum but they are not clear enough, especialy the left hand handlebar switches and ecu. if anyone does have a good copy can i have one please
Re: vrap 1000 wiring diagram
i have just fitted a hi/lo h4 led headlight bulb and the pass light would not work, the bulb worked wonderfully but not the pass light. i figured it out in the end, all i had to do was swap the positions of the blue and white wires on the bulb connector and now everything works as it should. the light output is about as good as the 35w hid but it is only 25w, i did notice when on hi beam both led chips illuminate at the same time, apparently this is completely normal according to manufacturer,i checked how many amps it was using
lo-1.9 amps
hi-2.08 amps
this is within spec
i could still do with a good copy of wiring diagram for future ref
lo-1.9 amps
hi-2.08 amps
this is within spec
i could still do with a good copy of wiring diagram for future ref
Re: vrap 1000 wiring diagram
Here's a PDF of the wiring diagram from the back of my Xtra user manual - your V should be the same, I think.
It's too big to add as an attachment, so I loaded it to PDFHOST: http://www.pdfhost.net/index.php?Action ... d3a4def6e0
It was too big to fit on my scanner so you'll have to print out the two pages and stick them together with sticky tape!
It's too big to add as an attachment, so I loaded it to PDFHOST: http://www.pdfhost.net/index.php?Action ... d3a4def6e0
It was too big to fit on my scanner so you'll have to print out the two pages and stick them together with sticky tape!
Road racing's where it's at - going round in circles all day is for hamsters.
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: vrap 1000 wiring diagram
Managed to get the wiring diagram scanned on a large scanner so here it is in one page glory!
http://i57.tinypic.com/2igbzeq.jpg -
I reduced the attachment size above to get past the 256 limit, but If you want the 463KB version head to
Last edited by Spyke on |October 16th, 2015|, 5:49 pm, edited 2 times in total.
Road racing's where it's at - going round in circles all day is for hamsters.
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: vrap 1000 wiring diagram
I keep looking but I can't see Waterloo or the Bakerloo line on that tube map
SnappY
~~X~X~{:>
~~X~X~{:>
- shebee
- Site Admin
- Posts: 2210
- Joined: 21 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: vrap 1000 wiring diagram
Excellent, thanks... Since my speedo decided not not play this weekend this may well be very useful soon!
Sent from my iPad using Technical magic
Sent from my iPad using Technical magic
Twisted Tequila Sister
Re: vrap 1000 wiring diagram
snapdragon wrote:55 years agoI keep looking but I can't see Waterloo or the Bakerloo line on that tube map
Road racing's where it's at - going round in circles all day is for hamsters.
Re: vrap 1000 wiring diagram
You're most welcome yeah!.
I'm now a bit concerned about number 31 - "Jogging"
WTF is that?!
I'm now a bit concerned about number 31 - "Jogging"
WTF is that?!
Road racing's where it's at - going round in circles all day is for hamsters.
Re: vrap 1000 wiring diagram
jogging > intermittence ? looks like it runs to the turn signal , i know what number 9 is, the thing that melted on my exhaust I did bit of a search and found that i am not the only one to have unsecured wiring drop on to the exhaust. Make sure everything around there is secured properly.
Re: vrap 1000 wiring diagram
Thanks Spyke - slightly off-topic but reason I am studying diagram is to try and work out which (if any) sensors can be disabled without affecting performance as I contemplate removing all emission equipment and plumbing - can anyone point me to a thread that deals with this? if not I will just start a fresh one.