led headlight
led headlight
has anyone tried these?
http://www.ebay.co.uk/itm/111144264702? ... 1423.l2649
H4 hi/lo drop in replacment 25 watt hi 25 watt lo allegedly brighter than the standard 55/60 halogen
http://www.ebay.co.uk/itm/111144264702? ... 1423.l2649
H4 hi/lo drop in replacment 25 watt hi 25 watt lo allegedly brighter than the standard 55/60 halogen
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: led headlight
Wow, they sure are expensive!
I'm not keen on riding at night, but if you get them let us know how you go.
I'm not keen on riding at night, but if you get them let us know how you go.
Road racing's where it's at - going round in circles all day is for hamsters.
Re: led headlight
they are expensive but i keep finding them at lower prices else where such as
http://www.aliexpress.com/item/1-Set-20 ... 95803.html .you do get 2 bulbs so the price could be split between 2 people if your willing to take the risk and order from someone in china
http://www.aliexpress.com/item/1-Set-20 ... 95803.html .you do get 2 bulbs so the price could be split between 2 people if your willing to take the risk and order from someone in china
Re: led headlight
i just ordered a set about 5mins ago for $88 i shall review them if/when they turn up in about 30ish days also i will be selling one bulb
Re: led headlight
fitted led bulb now, not a quick job on a vraptor, the big rubber boot on back of the headlight needs slight moddification so it does not restrict the air flow from the small fan on the bulb. initial impresions are very good light output, it is a white light not slightly blue or yellow, beam pattern is good , one strange thing is when hi beam is on both led chips are illuminated, apparently this is normaly.
only time will tell how long it will last, other than that a very good bulb
only time will tell how long it will last, other than that a very good bulb
- Bear of Little Brain
- On the Road
- Posts: 170
- Joined: 15 years ago
- Location: Worthing, West Sussex, UK
Re: led headlight
That's interesting, I hadn't expected a cooling fan (or is it used to push the light in the right direction? ). And I would have expected the beam pattern to be fairly spread out, since it is even less of a point source. Keep us posted on how it performs. I don't think you could put "energy saving" as a reason for purchasing the bulb. Especially with a V-Raptor.1add2 wrote:55 years agofitted led bulb now, not a quick job on a vraptor, the big rubber boot on back of the headlight needs slight moddification so it does not restrict the air flow from the small fan on the bulb. initial impresions are very good light output, it is a white light not slightly blue or yellow, beam pattern is good , one strange thing is when hi beam is on both led chips are illuminated, apparently this is normaly.
only time will tell how long it will last, other than that a very good bulb
Re: led headlight
energy saving was behind the idea ,that was the last fillament bulb left to replace, every point of illumination is now led , i know it isnt saving much but less work alternator does = more power at back wheel.
i have probably gained a lot less than 1hp but what the hell i like leds
i have probably gained a lot less than 1hp but what the hell i like leds
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: led headlight
do they have 2 leds on each? or are they like some hids with a moving holder? Also be careful as my hid required a little modding on the elefant to get the holder to fit as it is a little larger than the holder but there should be enough room on the raptor.
Bit of a Muppet
Re: led headlight
they do have 2 leds , 1 for low beam 1 for high beam , but when high beam is selected both are on (this is apparently normal i contacted manufacturer to check). i had to swap the wires around in the H4 socket (cant remember which) so the pass switch would work correctlyshedmonkey wrote:55 years agodo they have 2 leds on each? or are they like some hids with a moving holder? Also be careful as my hid required a little modding on the elefant to get the holder to fit as it is a little larger than the holder but there should be enough room on the raptor.