FITTING A T.R.E

Technical stuff specific to the V and Xtra raptors
Post Reply
cookie 1964
On the Road
Posts: 9
Joined: 18 years ago
Location: northeast uk

FITTING A T.R.E

Post by cookie 1964 »

What kind of a job is it to fit and what do you strip to do the job ? :?
Top
TLMONKEY
On the Road
Posts: 270
Joined: 18 years ago
Location: LANCASHIRE, U.K.

Re: FITTING A T.R.E

Post by TLMONKEY »

cookie 1964 wrote:55 years agoWhat kind of a job is it to fit and what do you strip to do the job ? :?
Peice of piss mate.
Just unplug the two connector's(white) for the gps(gear position sensor) on rightside of bike and plug the two white connectors of the tre into the matching plug's,they can only go in one way(3 pin male+3 pin female)
Top
User avatar
Miz
On the Road
Posts: 818
Joined: 19 years ago
Location: Derby

Yup

Post by Miz »

Takes 5 mins (or 10mins if you hide the tre and tyrap it). Have fitted mine and now have removed the Power Commander, bike runs just as good and a tank lasts nearly 110miles til the light comes on..
152/999
Image
Image
Top
cookie 1964
On the Road
Posts: 9
Joined: 18 years ago
Location: northeast uk

Post by cookie 1964 »

Cheers for that found the plug no problem, but the one they have supplied is tringular shaped not flat.

Will try and email them :cry:
Top
User avatar
Miz
On the Road
Posts: 818
Joined: 19 years ago
Location: Derby

Plug

Post by Miz »

Well I'm sure mine was triangular, are u looking on the right hand side of the bike (as u are sat on it), behind the frame tube by the snorkel for the airbox.
152/999
Image
Image
Top
cookie 1964
On the Road
Posts: 9
Joined: 18 years ago
Location: northeast uk

Post by cookie 1964 »

Looking on right from front ALLSORTED NOW A big THANK YOU to you Guy's :oops:
Top
ozzy
On the Road
Posts: 189
Joined: 19 years ago
Location: peterborogh

Post by ozzy »

what difference did you notice fitting the TRE.
Top
Post Reply

Return to “V-Raptor and Xtra”