Hello!
I'm having problems with my otherwise quite good Raptor. I bought it 2y ago and it was working well. I mean well otherwise than the 3k glitch and occational valve ticking noise...
The first problem was when temperatures didnt raise over 60'c and that was fixed with a thermostat and water temperature sensor change.
The second problem has been a bit more difficult to solve. When the engine is hot, I get loud backfire everytime after accerelation, around 6k and 3k on deacceleration. And also there seems to be a delay and misfire when revving up around 2k-3k even in neutral gear and stationary. When the coolant temperature was under 80-90'c everything worked well.
So far I've changed coolant temperature sensor (again) and spark plugs and adjusted the throttle position sensor. I'm thinking of trying a different ECU because the bike works well before the engine gets hot and changes the ecu program.
Im getting desperate here!
Raptor 1000 and serious misfire and backfire problems
-
- On the Road
- Posts: 581
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 3 times
- Been thanked: 13 times
Raptor 1000 and serious misfire and backfire problems
The accepted method of resolving this was to 'insert' a resistor in the engine temperature wiring that fooled the ecu into thinking the engine was hotter than it actually was. The ecu would then chnage the fuelling map an smooth out any rough running see viewtopic.php?t=3790&start=45
This usually points to exhaust leaking at one or more of the unions - the rear down pipe to collector tubes is a common place for it to fail. Failing that the pair valve shenangigans can cause backfires especially if after market cans are fitted. It's best to remove the complete mechanism & blank off their connection to the header see https://www.ebay.co.uk/itm/265068451185 ... 2749.l2649
Leaping to the conclusion that's it's the ecu seems a bit drastic to me at least before checking the ignition and fuel systems. The wires to the ignition coils, as well as being a pain to get to, easily corrode/become loose and need checking. I've had a failed coil before now. The fuel pump needs checking & if the bikes being standing for some time the fuel may have gone off. Something simple like the vent hole in the fuel cap might be the culprit - it may even be related to the previous (exhaust) item.
Raptor 1000 and serious misfire and backfire problems
Thank you for reply! I finally found a shop that was willing to take the bike in. They checked the valve clearance and it it was okey. They also found that the fuel pump wasn’t working properly. It didn’t raise enough pressure.
Do you or anyone else know what kind of replacement would be best? Of course the original would be, but the availability isn’t very good in my country.
Do you or anyone else know what kind of replacement would be best? Of course the original would be, but the availability isn’t very good in my country.
-
- On the Road
- Posts: 581
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 3 times
- Been thanked: 13 times
Raptor 1000 and serious misfire and backfire problems
See https://www.raptorchapter.org.uk/viewtopic.php?t=3879
A web search for Suzuki TL1000R will come up with some lost cost options for, just, the pump itself so there will be a little more work adapting it to the complete assembly.
A web search for Suzuki TL1000R will come up with some lost cost options for, just, the pump itself so there will be a little more work adapting it to the complete assembly.
Raptor 1000 and serious misfire and backfire problems
Once again, thank you
I’ll take the pump out today and see what markings it has.
I’ll take the pump out today and see what markings it has.