Project Polar-Raptor

Somewhere for you to post your piccies of you and your bikes
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

Lexio62 wrote: 7 years ago I'm looking to get custom (flat) top yokes made up to fit the raptor with retaining the cagiva wheel.
Are you still planning to use GSX-R forks?
http://www.raptorchapter.org.uk/viewtopic.php?t=4517
Don't ride faster than your angels can fly !
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

V4mp wrote: 7 years ago I have to wash bike before I can take any detailed photos. :D
But they are coming before winter and snow arrives.
I know... I promised pictures, but I just started winter season and bike tear down. :oops:

Here is something I have planed for this winter:
- Wheel alignment, I'm not 100% sure that after swingarm swap rear wheel is in bikes centerline.
- Chain conversion to 520, MV Agusta uses 525 chain and Raptor uses 530..
- Chain alignment, make sure I don't immediately destroy my new chain and sprockets.
- Re-engineer rear linkage, after swingarm swap I have lost almost half of rear wheel travel compared to stock.

There are other things I would like to do, but lets talk about them after I've done things I listed above.
Don't ride faster than your angels can fly !
User avatar
snapdragon
Moderator
Posts: 3245
Joined: 22 years ago
Location: Wiltshire

Re: Project Polar-Raptor

Post by snapdragon »

My word you're going to be busy over the winter, I'm just waiting for it to stop raining, really have to buy a different house.. one with a garage!
SnappY
~~X~X~{:>
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

snapdragon wrote: 7 years ago My word you're going to be busy over the winter, I'm just waiting for it to stop raining, really have to buy a different house.. one with a garage!
Sounds like a good plan ;)
Don't ride faster than your angels can fly !
User avatar
El Vikingo Tropical
On the Road
Posts: 204
Joined: 9 years ago

Re: Project Polar-Raptor

Post by El Vikingo Tropical »

Hej how’s things going
I’m been busy making some Cafe Racers from other brands but I just want to say that I haven’t stopped watching your great build!
I wish you a very creative and good Christmas full off parts for your Polar Raptor!

Regards
Jan
Saludos desde Canarias
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

Well, I have made some measurements and result aren't what I've wished for... :ouch:
Rear wheel needs to be moved 7mm left! That is more than I thought. :blink:
First idea was to machine excessive material off the wheel, but idea was pretty quickly ditched after I realized that rear brake caliper would hit the wheel, tyre might scrub the swingarm... Next I started to look at the frame, but it seems that 7mm might be too much taken from the frame which doesn't leave many options left. Idea is now to machine excessive material from the swingarm.
Why it is my last option? Because it is the hardest and probably the most expensive solution. :pinch:
Next thing is to start asking offers from different machine shops. Then swingarm is hopefully going to get machined or I have to find other way to get around the problem.

P.S.
What irritates me the most is that chain line is now pretty much spot on. :angry:
Don't ride faster than your angels can fly !
User avatar
El Vikingo Tropical
On the Road
Posts: 204
Joined: 9 years ago

Re: Project Polar-Raptor

Post by El Vikingo Tropical »

That’s Murphy's law :lol:
I think taking away material from the swingarm is the right way making it as well!
Keep on rolling!
Saludos desde Canarias
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

I removed bearings from swingarm to see if there is enough material to be removed.
And its looks like there isn't. :rant:
Next thing is to investigate if it is possible modify rear wheel axle. :geek:
Don't ride faster than your angels can fly !
User avatar
El Vikingo Tropical
On the Road
Posts: 204
Joined: 9 years ago

Re: Project Polar-Raptor

Post by El Vikingo Tropical »

Is it possible to machine the swingarm moving the bearing some mm more in?
Saludos desde Canarias
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

El Vikingo Tropical wrote: 6 years ago Is it possible to machine the swingarm moving the bearing some mm more in?
There is not enough material. :angry:
That is what I tried to tell in the last post. :oops:
Don't ride faster than your angels can fly !
User avatar
El Vikingo Tropical
On the Road
Posts: 204
Joined: 9 years ago

Re: Project Polar-Raptor

Post by El Vikingo Tropical »

Tinner bearing?????
Saludos desde Canarias
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

I'm now investigating if rear wheel axle could be modified. :geek:
Don't ride faster than your angels can fly !
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

I haven't made a post for a while... :oops:
I've been really busy with the bike. I try to make some posts with pictures from different phases bike has gone through. Bike is now running and been dynoed, made almost 104hp at the wheel. ;)
Don't ride faster than your angels can fly !
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

Solution to move rear wheel toward bikes centerline was to remove material (~5mm) from one of the rear wheel axle shoulders. There were risk that after machining rear wheel carrier might hit the hub. But luckily with small grinding of rear wheel stud fixing bolt heads, problems were fixed. Better, long lasting solution might come next winter, depending on how far we are from bikes centerline with current solution.

Image
Don't ride faster than your angels can fly !
User avatar
V4mp
On the Road
Posts: 470
Joined: 11 years ago
Location: Finland
Been thanked: 1 time
Contact:

Re: Project Polar-Raptor

Post by V4mp »

Other thing I was planed to do was rear suspension linkage.
I thought the easiest way to make suspension work properly were to fit MV Agusta linkage to the bike.
I made some measurements and it looked possible. All I had to weld new mounting point for the linkage. :D

Image
Picture from AutoCAD, measuring where to mount the linkage.
Don't ride faster than your angels can fly !
Post Reply