I dont have the digital temperature display on the speedo So can't see the error codes....
I'd also like to test/ adjust the TPS which is usually done via the temp display.....
Are all 650ie missing the temp display???
Any advice would be great
How do I read error codes on my Raptor 650ie
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: How do I read error codes on my Raptor 650ie
Got to admit i dont know. Have you got a manual for the rap or if it shares ecu from suzuki then that manual might help .But i think it should be possible.
Good luck. Was in Keswick all day yesterday working. Forgot to ask how did you end up living over there?
Good luck. Was in Keswick all day yesterday working. Forgot to ask how did you end up living over there?
Bit of a Muppet
Re: How do I read error codes on my Raptor 650ie
Cheers Shedmonkey...
No manuals..... I haven't found one for the 650ie
Been over here for 18 years now!
I started work at BNFL Salwick as an apprentice when I was 16 finished my apprenticeship after 4 years and looked for a new challange....
Which happened to be at CERN ..... big bang...... Black hole..... Angels and Demons....... you know the one
Well I've been here ever since
Which reminds me to go and tackle the Cumbria fells again
Cheers,
Paul.
No manuals..... I haven't found one for the 650ie
Been over here for 18 years now!
I started work at BNFL Salwick as an apprentice when I was 16 finished my apprenticeship after 4 years and looked for a new challange....
Which happened to be at CERN ..... big bang...... Black hole..... Angels and Demons....... you know the one
Well I've been here ever since
Which reminds me to go and tackle the Cumbria fells again
Cheers,
Paul.
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: How do I read error codes on my Raptor 650ie
Guessing your language skills are good Plums -? -
try This one ? I'm not sure what language it's in but probably Italian.
you may have to join the raptormania forum to get it (80mb) it's a safe site, admins there are members here and vice versa
By the way - have you checked your pockets? that there higgsbosun thingy could be hiding in there
try This one ? I'm not sure what language it's in but probably Italian.
you may have to join the raptormania forum to get it (80mb) it's a safe site, admins there are members here and vice versa
By the way - have you checked your pockets? that there higgsbosun thingy could be hiding in there
SnappY
~~X~X~{:>
~~X~X~{:>
Re: How do I read error codes on my Raptor 650ie
Cheers Snapdragon!
I'll take a look at the Italian site
Yeah Higgs boson I had it the other day but I'll be buffered if I can remember where I put it
Cheers.
Paul.
I'll take a look at the Italian site
Yeah Higgs boson I had it the other day but I'll be buffered if I can remember where I put it
Cheers.
Paul.
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: How do I read error codes on my Raptor 650ie
Had a look on sv site and it sounds simillar to 1000 linking 2 wires in empty connector but do you have temp shown on speedo under any circumstances?
but on sv its a 6 way plug and you connect rh 2 (vertically) when looking at plug terminals with locking clip to the top. Hope this helps
Its on svrider.org how do i put my bike into dealer mode.
And WOW about the job cool.
but on sv its a 6 way plug and you connect rh 2 (vertically) when looking at plug terminals with locking clip to the top. Hope this helps
Its on svrider.org how do i put my bike into dealer mode.
And WOW about the job cool.
Bit of a Muppet
Re: How do I read error codes on my Raptor 650ie
Cheers for the file Snapdragon that's perfect!
Sadly Shedmonkey I have no Temp on my speedo If I press the button it just toggles between Trip1 and Trip2....
Cheers guys!
Paul.
P.S. It is a cool job that does have it's ups and downs.... or should I say round and rounds
Sadly Shedmonkey I have no Temp on my speedo If I press the button it just toggles between Trip1 and Trip2....
Cheers guys!
Paul.
P.S. It is a cool job that does have it's ups and downs.... or should I say round and rounds
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: How do I read error codes on my Raptor 650ie
Could you borrow a injected sv650 speedo? is the socket the same?
Bit of a Muppet