pair valve advice

General spannery stuff
Post Reply
craigus
On the Road
Posts: 184
Joined: 17 years ago
Location: southampton

pair valve advice

Post by craigus »

hi all could somebody give me an idoits guide on how to remove the pair vavle with pics if poss ,i've seen the sv 1000 but the pics are not clear to me as the parts are the same .any help would be great
User avatar
snapdragon
Moderator
Posts: 3245
Joined: 21 years ago
Location: Wiltshire

Post by snapdragon »

Would his thread help?
SnappY
~~X~X~{:>
craigus
On the Road
Posts: 184
Joined: 17 years ago
Location: southampton

Post by craigus »

managed to figure it out in the end the pair valve system is not as complicated as i first thought i do have a question though do i need to block off the the vacum to the rear carb.
User avatar
Cavia
On the Road
Posts: 391
Joined: 18 years ago
Location: katwijk aan zee ,Holland

Post by Cavia »

yep, block everything off you pulled apart also on the airbox
No bike is ever finished!
craigus
On the Road
Posts: 184
Joined: 17 years ago
Location: southampton

Post by craigus »

put it all back together today & started it up ,once the engine had warmed up & i took off the choke i had to up the tick over a fair bit to get it right ,is this normal oohh & i disconnect the hose to flap in the air box dont know why i read it somewhere i think . Not been able to test ride it yet dont want to get wet
Post Reply