Hi Guys/Girls,
Another question which I can't find in the manual.
Does anybody know the correct socket size for the rear wheel nut. Trying to do some chain adjustment but nothing fits it. Either too big or too small.
Appreciate any help.
Thanks
Gavin
Socket Size
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
It's a 28mm
not a common size and rarely part of any sets - but part of the original toolkit
not a common size and rarely part of any sets - but part of the original toolkit
Last edited by snapdragon 17 years ago, edited 1 time in total.
SnappY
~~X~X~{:>
~~X~X~{:>
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
- stevepratt48
- On the Road
- Posts: 160
- Joined: 17 years ago
- Location: Anglesey
As mentioned, 28mm socket or ring spanner for Nut (should be socket and torque wrench by rights) and a 27mm open-end spanner for securing t'other side...
you can get a 28mm individual socket from any decent engineering merchants, tool shop or motor-factor...
for info
www.beta-tools.com
regards
Brihass
you can get a 28mm individual socket from any decent engineering merchants, tool shop or motor-factor...
for info
www.beta-tools.com
regards
Brihass
140/999 Xtra Raptor.....Carbon Quill Cans, Carbon Hugger, Carbon Rear Guard, Carbon Bar End Mirrors, Renthal Bars, Belly Pan, Power Commander, K&N, TRE, Iridium Plugs, Silicon Leads, 2CT's.
- stevepratt48
- On the Road
- Posts: 160
- Joined: 17 years ago
- Location: Anglesey