Search found 10 matches

by Aloud
10 years ago
Forum: Raptor 1000
Topic: rear brakelight not working .. 1000
Replies: 21
Views: 10296

Re: rear brakelight not working .. 1000

snapdragon,

what happened, did you manage to install it?
Do you have response from the rear lever?
by Aloud
10 years ago
Forum: General Technical
Topic: 3000 rpm gritch at temperature under 80 deg C
Replies: 40
Views: 13287

Re: 3000 rpm gritch at tepmeratute under 80 deg C

... So, what you are saying is at tick over, its not happy until 80degrees? I'm assuming both cylinders kick in at 79 and then its ok? Next time you start up, put your hand over the exhaust can spout, and see if one is cold and not blowing, or if both are blowing and heating at the same time. If on...
by Aloud
10 years ago
Forum: General Technical
Topic: 3000 rpm gritch at temperature under 80 deg C
Replies: 40
Views: 13287

Re: 3000 rpm gritch at tepmeratute under 80 deg C

Sorry but again I can not agree with you. I can say this bike is perfect for riding as out of country as in the towns 8) I ride it almost all of the year except in the winter, of course. But not and this year :( As I told before for sure there is a problem with my bike. I will not stop till I find a...
by Aloud
10 years ago
Forum: General Technical
Topic: 3000 rpm gritch at temperature under 80 deg C
Replies: 40
Views: 13287

Re: 3000 rpm gritch at tepmeratute under 80 deg C

I do not quite agree. As I am riding the bike for the last five years I think I know it pretty well. Certain problems occur this year and it was not until the engine went into operation. Effect that occurs to me is this. At temperature below 79 degrees there is a "hole" of about 3000 rpm. ...
by Aloud
10 years ago
Forum: General Technical
Topic: 3000 rpm gritch at temperature under 80 deg C
Replies: 40
Views: 13287

3000 rpm gritch at temperature under 80 deg C

Hi fellows, after four years without almost any problems and enjoying of performance of my bike, this year it became awful and very unpleasant to ride... I have checked everything from the fuel system, throttle bodies, injectors and all the sensors to the ECM. Everything is in operational but same t...
by Aloud
11 years ago
Forum: Raptor 1000
Topic: Rubber Stopper whatever...
Replies: 4
Views: 2964

Re: Rubber Stopper whatever...

Till I am waiting let me ask you something. I know most of you are located in UK.
My question is from where you are looking for and buy some spares?
This will be very helpful to me.
by Aloud
11 years ago
Forum: Raptor 1000
Topic: Rubber Stopper whatever...
Replies: 4
Views: 2964

Re: Rubber Stopper whatever...

Hi Alex, Glad you still have your Raptor. I don't know if they have an actual name, but I would describe them as Swing-arm pivot end caps. Yes, weirdo same Raptor :D I missing one of those as well! Just been and checked and I'm missing the right hand side one. I think they're about £10 each from ca...
by Aloud
11 years ago
Forum: Raptor 1000
Topic: Rubber Stopper whatever...
Replies: 4
Views: 2964

Rubber Stopper whatever...

Hi fellows, I need some help. After last ride I have discovered I lost this special rubber stopper..., not sure about the name. They are two on both sides of bike. I believe pictures will help: This is on right side of the bike: http://ftp.domainbg.com/Aloud/Temp/Raptor/DSC00390.JPG The missing one ...
by Aloud
15 years ago
Forum: General Chat
Topic: Harley-Davidson to revive Cagiva
Replies: 5
Views: 2374

Harley-Davidson to revive Cagiva

I have got this information today
Harley-Davidson to revive Cagiva
...But for now, all we can do is wait and watch, and hope Harley-Davidson will work a few miracles for Cagiva…

Anyway it is Great News!
by Aloud
16 years ago
Forum: Virtual Bar
Topic: Hi everybody
Replies: 5
Views: 2678

Hi everybody

Hello everybody!
I am Alex from Bulgaria.
of course a proud owner of Raptor 1000 :D