Search found 41 matches

by 1add2
Fri Oct 30, 2015 10:10 pm
Forum: General Technical
Topic: Parts Listing
Replies: 25
Views: 20072

Re: Parts Listing

brembo parts list. with this you can see what other bikes share the same brake components replacement brake pistons and seals are available from here http://www.bikersjersey.com/?year=2003&modeltype=200&model=%20972234&schematic=C03587132 the KTM 640DUKE II uses the same left hand caliper as the 100...
by 1add2
Fri Oct 30, 2015 12:24 pm
Forum: V-Raptor and Xtra
Topic: brembo calipers
Replies: 7
Views: 1764

Re: brembo calipers

after hours of searching i found the caliper ref numbers 20.6800.10 left hand, 20.6800.20 right hand, the rear is 20.6951.51 , rear master cylinder is 10.4776.53. the front calipers are the same as fitted to most of the ducati monster range
for future reference
by 1add2
Thu Oct 29, 2015 8:43 pm
Forum: V-Raptor and Xtra
Topic: brembo calipers
Replies: 7
Views: 1764

Re: brembo calipers

thanks miz thats great , i also need the pistons aswell
by 1add2
Thu Oct 29, 2015 6:59 pm
Forum: V-Raptor and Xtra
Topic: brembo calipers
Replies: 7
Views: 1764

brembo calipers

does anyone know the model type of the front brembo calipers fitted to the 1000 vraptor . or the ref code of the piston and seal rebuild kit .my pistons are pitted and the seals are fooked and i need to fix them quickly

thanks
by 1add2
Sun Jun 07, 2015 6:06 pm
Forum: Raptor 1000
Topic: pcII maps
Replies: 4
Views: 972

Re: pcII maps

thanks bazzywazz, got them now ,what setup have you got and which map do you use?
by 1add2
Sat Jun 06, 2015 9:41 am
Forum: Raptor 1000
Topic: pcII maps
Replies: 4
Views: 972

Re: pcII maps

thanks ozzraptor ,if you can email me those that would be great. do you need me to private msg you my email address?
by 1add2
Thu Jun 04, 2015 5:57 pm
Forum: Raptor 1000
Topic: pcII maps
Replies: 4
Views: 972

pcII maps

hello, is anyone willing to share their pcII maps, i can only find these from dynojet Stage1 Stock Exhaust Stock Filter Pump fuel std. green 95 octane Stage2 Stock Exhaust K&N Filter FBF Forza Racing Mufflers K&N Filter there must be many more , i have just fitted a pair of SHORT TITANIUM cans from ...
by 1add2
Sat May 24, 2014 8:20 pm
Forum: Raptor 1000
Topic: Clutch cable snapped, where can I get one? :(
Replies: 22
Views: 2800

Re: Clutch cable snapped, where can I get one? :(

a tl1000s clutch cable will fit ,ive just fitted one to my standard vrap 1000 today. the nipple at the lever end is slightly smaller so add the little plastic bit from your old one to take up the looseness,also there is a 90 degree bend on the tl cable up at the bars which needs gently easing back t...
by 1add2
Mon Mar 31, 2014 8:43 pm
Forum: General Technical
Topic: LED headlight bulb
Replies: 11
Views: 1288

Re: LED headlight bulb

Ooh, that is very purdy! :thumbsup: I don't ride at night, and I run with my headlight off during the day (for a Top Secret reason!), so I can't justify the expense of flash lighting, but I have swapped the parking light globe for an LED one, and the white light from that is much nicer than the yel...
by 1add2
Sat Mar 29, 2014 1:09 pm
Forum: General Technical
Topic: LED headlight bulb
Replies: 11
Views: 1288

Re: LED headlight bulb

led lights , main ,park,off
by 1add2
Tue Mar 25, 2014 7:32 pm
Forum: General Technical
Topic: LED headlight bulb
Replies: 11
Views: 1288

Re: LED headlight bulb

i will try to get a picture of it by the weekend (correction 6 left 6 right 3 above)
by 1add2
Mon Mar 24, 2014 9:23 pm
Forum: General Technical
Topic: LED headlight bulb
Replies: 11
Views: 1288

Re: LED headlight bulb

http://www.raptorchapter.org.uk/viewtopic.php?f=11&t=4048 How is the led light going , no blown bulb yet ? I would think they should last a long time. Hmmm another job to do ! Is it a straight out plug and play, no splicing of wiring ? Did you do the small parker at the front as well, they are pret...
by 1add2
Mon Mar 24, 2014 9:10 pm
Forum: General Technical
Topic: led headlight
Replies: 10
Views: 1250

Re: led headlight

do they have 2 leds on each? or are they like some hids with a moving holder? Also be careful as my hid required a little modding on the elefant to get the holder to fit as it is a little larger than the holder but there should be enough room on the raptor. they do have 2 leds , 1 for low beam 1 fo...
by 1add2
Sun Mar 23, 2014 4:08 pm
Forum: General Technical
Topic: LED headlight bulb
Replies: 11
Views: 1288

Re: LED headlight bulb

by 1add2
Sun Feb 16, 2014 8:00 pm
Forum: V-Raptor and Xtra
Topic: 2 into 1 exhaust
Replies: 11
Views: 1705

Re: 2 into 1 exhaust

thanks to everyone for the comments , the loss of low end grunt when fitting a 2-1 is something i can do without