Raptor Chapter

Hi, I have just done this mod and it is up there with the best. I bought the shock (2004 triumph 600-same shock as 650) and had my local shop, RAD engineering service it and manufacture the mounts (top and bottom) so it was just a bolt in job and cost less than $200 Aus. to do. I have the link raise...

Hi andy, with a TRE, air box open at top, Leo Vince mufflers with the DB's in, Hi-flow air filter and the dual map fueling, the toque curve is a little bit stronger and smoother across the range. It was quick enough before, but now is just a pleasure to ride everywhere in the rev range. As an aside,...

Well, I was using a downloaded map for my PS3 from their website which was reasonably good to ride with. The lower fuelling never felt as good as it should be (under 5000 rpm) so I bit the bullet and had a dyno map done. The downloaded map gave me 111Hp and now I have 113Hp but the rich fuelling dow...

After 3monthes and 2 weeks I started a dispute and with paypal received a refund, which is great. However after all this time and several emails and attempted phone calls they actually sent me an email from a person after I had started the dispute saying it was on backorder. To late and I hope that ...

order number - OEM43541 Well, I am now 2 months down the track and not only am I $165 out of pocket and do not have the part, but I have had no reply to my emails other than the computer bot. OEM has even stop sending the 7 day updates (also a computer bot message) nor have they cross referenced the...

Hi, I have installed a PC3 to my raptor and because I bought it of the web from America I do not have access to the power commander site maps. Does this site have a map location for storing data or can some one direct me to a site that has .DJM maps for a raptor 1000. I have searched this site for &...

Just a thank you for this mod, I used a 220ohm resistor with a bar mounted switch in parallel with the temp sensor and switch it on at 30'C when warming up and switch it off at 110'C to remove the 3K glitch. In just another interesting aside, on my ride yesterday (30'C ambient temp, resistor switche...

Hi, I have fitted a PC3 (tl1000s type) and it came with the full yoshi & filter map. which was a pretty rich fueling map . My Rappy has the top of the airbox and side pods removed, Leo vince SBK pipes with DB killers in, all internal fittings in the air box removed and a TRE fitted, also I have ...

Has anyone had any experience with this company. I ordered a Cagiva rear chain sider on the 6-12-15 which there web site showed as in stock. I registered for their site to follow the order and it does not appear there. Every seven days they send me an Email confirming my order and saying it is undel...

Thanks, yes I would like to keep the original wheels so I am trying to find 320mm discs to suit. I can then keep the GSXR brakes and just space them to work.

Hi, has anyone done the this conversion - 99 GSXR750 srad forks on a rappy and if so , do you have any advice for me. I have looked at the fork conversion chart and there are a few holes for this set of forks in the info.

Brisbane Australia.

Hi, it also comes up as MV Augusta part # 800095580 if needed in the future

Done and dusted , thanks

Does anyone know where to get a swing arm chain guide as I do not have one on my Raptor 1000 and I hope that they are still available. Some help with this would be much appreciated. I came from a tuono to the Rappy and it is a lot of fun.