Raptor Chapter

My bike is up for sale sadly :( https://www.ebay.co.uk/itm/283596525350 Job loss and moving house forces the sale. Currently not running as described in the fleabay ad - electrical problem, but was running sweet until then. email me with any questions on thefastenershop@outlook.com Might break fr sp...

Don't know if this thread is too old - not got round to looking at the bike much, but there is no spark either.

Might this be a CDI issue as there's no power to the pump, of a spark?

All the lighting etc. has power.

Rich.

Thanks for the reply - had another listen and the sidestand relay does click (very quietly).

I'll check there's power up to the kill switch tomorrow.
There's a 4 pin plug on the loom going into the relay - should there be 3 positives and an earth?

Well, the old girl is still sleeping :( . I've spoken to Datatool and they told me how to bridge the connections in the alarm to eliminate this as a problem, shouldn't be that. the relays don't click.. but if you switch on the ignition one gets warm? think it's the sidestand one from memory. Maybe t...

I would reckon you have got to to be honest Rich. If you have a diagram of how it fits/ where it connects into then you can see if it could affect your issue. Otherwise the only real way to be sure its doing what its supposed to as per standard is to remove the alarm/immobiliser and ensure everythi...

So - tilt switch seems to be working OK. Situated as advised behind the headstock.
Took it off and tested it with a multimeter - opened it up for a clean. Seems to be fine

Might be time to look at the Datatool alarm.

Tilt switch is just behind the headstock as far as I remember. THe datatool alarm and immobiliser could be affecting this depending on how it is wired in to the bike and what it disconnects when enabled. I would remove it completely and see what affect it has. I do not have my large diagram with co...

First might be better if I explain how it works; When ignition switch is on this provides 12v to the side stand relay which providing the side stand switch is working will allow the relay to operate and give 12v out to the engine stop switch. if this is in run position it allows the fuel pump relay...

That code is saying there are no faults indicated. Other things that can affect this start up operation are; side stand switch tip over sensor fuel pump relay ECM If you are hearing the fuel pump relay operate (click) then the pump should run for the 3 seconds until started. If not check the connec...

following on from an earlier post about TL1000 fuel pumps.. I managed to get a tank with a fuel pump off ebay (my tank need s a respray). Fitted the new tank today, and still have the same problem - when you turn the ignition on, the relay clicks in, but the pump doesn't prime up. fuse is ok, swappe...

:( Further to my thread about replacement fuel pumps - managed to get a used tank and pump off fleabay. When I turned the ignition on with my old tank and pump, the relay clicked in, but the pump didn't prime up, so presumed the pump was kaput. I fitted the new tank and pump today and it's the same ...

managed to get a tank and pump off ebay, thanks for the help.

Might try another pump as a spare and will post up any results if I succeed

andybaggies wrote: ↑6 years ago I notice this is for the pump only and doesn't include any gaskets, filters pipes etc that if required would have to be purchased separately.

didn't clock that - thanks for the info

This thread might be of use? http://www.raptorchapter.org.uk/viewtopic.php?t=3879 X Thanks for that :happyhappy: Been looking at this pump which I think should work, 2 year guarantee and cheap as chips. https://www.ebay.co.uk/itm/SUZUKI-TL-1000-TL1000R-TL1000RW-TL1000S-1997-1998-1999-2000-2001-FUEL...

Tank wanted, any colour considered, pump or none.

Or any recommendations to strip crappy Halfords rattle can paint by the previous owner and respray?

Some people..