Project Polar-Raptor
-
- On the Road
- Posts: 49
- Joined: 8 years ago
Re: Project Polar-Raptor
No need, exhaust is already modified...gilbert666 wrote:You will have to bulit another exhaust for the swing arm, I started one when I tried to mount the mv agusta mono.
I still have the rear exhaust part and some front parts to complete your exhaust if you need it.
if it can help....
It can be seen if you watch precisely enough.
gilbert666 wrote:Is there a problem with your pictures? none are visible today....
Hmm, I haven't done anything since last post... Are pictures still missing?
Don't ride faster than your angels can fly !
- shebee
- Site Admin
- Posts: 2210
- Joined: 21 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: Project Polar-Raptor
Pictures look ok here todaygilbert666 wrote:Is there a problem with your pictures? none are visible today....
Twisted Tequila Sister
-
- On the Road
- Posts: 49
- Joined: 8 years ago
Re: Project Polar-Raptor
Now I see the modified exhaust, as pictures works Don't know why I didn't see it before....V4mp wrote: No need, exhaust is already modified...
It can be seen if you watch precisely enough.
God job!!
You need to adapt a lower exhaust now!
Re: Project Polar-Raptor
Maybe in future... maybe.
I do like panigale style exhaust... This looks pretty sexy too I think.
I do like panigale style exhaust... This looks pretty sexy too I think.
Don't ride faster than your angels can fly !
- El Vikingo Tropical
- On the Road
- Posts: 204
- Joined: 8 years ago
Re: Project Polar-Raptor
I think it's look really good. .....V4mp wrote:Maybe in future... maybe.
I do like panigale style exhaust... This looks pretty sexy too I think.
Saludos desde Canarias
Re: Project Polar-Raptor
Decreased preload to minimum and the ride is way better!V4mp wrote:Bike rides pretty nicely, only thing that really irritates me is how stiff rear end is. Looks like I've to change rear spring to softer one.
The question is how much softer, I think I need suspension specialist to answer that question.
Next step is to play with compression,rebound settings...
Don't ride faster than your angels can fly !
- El Vikingo Tropical
- On the Road
- Posts: 204
- Joined: 8 years ago
Re: Project Polar-Raptor
Very little has happen since last post... Because I live about 200km from my bike.El Vikingo Tropical wrote:How goes the beautiful bike from FINLAND?
Its great to have work, but it makes bike building harder almost impossible.
I've to find space to store my bike... If I don't I'm going crazy, what else you can do in the winter, but modifying your bike?
Since last post I've installed bellypan and swingarm cover, relocated piggypack. Pictures coming later.
To do list:
- R1 forks
- Rear brake caliper
- Motogadget goodies
Don't ride faster than your angels can fly !
- El Vikingo Tropical
- On the Road
- Posts: 204
- Joined: 8 years ago
Re: Project Polar-Raptor
Yes I know that the winter is long upp in the north...V4mp wrote:Very little has happen since last post... Because I live about 200km from my bike.El Vikingo Tropical wrote:How goes the beautiful bike from FINLAND?
Its great to have work, but it makes bike building harder almost impossible.
I've to find space to store my bike... If I don't I'm going crazy, what else you can do in the winter, but modifying your bike?
Since last post I've installed bellypan and swingarm cover, relocated piggypack. Pictures coming later.
To do list:
- R1 forks
- Rear brake caliper
- Motogadget goodies
Keep going don't lose the ilution
The R1 fork and calipers is great stuff
Saludos desde Canarias
Re: Project Polar-Raptor
I try my best!El Vikingo Tropical wrote: Yes I know that the winter is long upp in the north...
Keep going don't lose the ilution
The R1 fork and calipers is great stuff
Even better when upgrated with ISR 6-pot calipers and bitubo cartridge... At least in my dreams.
ISR:
BITUBO:
Don't ride faster than your angels can fly !
-
- On the Road
- Posts: 49
- Joined: 8 years ago
Re: Project Polar-Raptor
Long time since last post.
Here is what has happen...
This winter number one thing was to get R1 forks fitted.
When I bought R1 forks, I bought it as a kit. Reason for that was, I had made Monster fork swap before and learned that it needs less fabrication more parts you use from donor bike. R1 kit included: forks, front wheel, front axle, brake calipers, master cylinder and lower yoke with steering stem.
From complete front end I was just missing caliper bolts, brake lever, front axle spacers and top yoke. After purchasing missing parts it was time for measuring and engineering how to fit R1 front end to Raptor. First idea was to modify R1s steering stem to fit, but it was ditched after more measuring and engineering. New idea was to use Raptors stock steering stem and fit it to R1 yokes using spacers. So I took parts to machinist and hoped I had planned everything right. When I received parts from machinist and started to installing them I was reliefed, everything fitted pretty much as planned. Minor problems were top yokes hiting ignition switch cover rubber and steering locks claw. But problems were easily solved with angle grinder.
Next thing was to decide should I go with clip-ons or regular handlebar.
Here is what has happen...
This winter number one thing was to get R1 forks fitted.
When I bought R1 forks, I bought it as a kit. Reason for that was, I had made Monster fork swap before and learned that it needs less fabrication more parts you use from donor bike. R1 kit included: forks, front wheel, front axle, brake calipers, master cylinder and lower yoke with steering stem.
From complete front end I was just missing caliper bolts, brake lever, front axle spacers and top yoke. After purchasing missing parts it was time for measuring and engineering how to fit R1 front end to Raptor. First idea was to modify R1s steering stem to fit, but it was ditched after more measuring and engineering. New idea was to use Raptors stock steering stem and fit it to R1 yokes using spacers. So I took parts to machinist and hoped I had planned everything right. When I received parts from machinist and started to installing them I was reliefed, everything fitted pretty much as planned. Minor problems were top yokes hiting ignition switch cover rubber and steering locks claw. But problems were easily solved with angle grinder.
Next thing was to decide should I go with clip-ons or regular handlebar.
Don't ride faster than your angels can fly !
-
- On the Road
- Posts: 581
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 3 times
- Been thanked: 13 times
Re: Project Polar-Raptor
That's definitely the way to do it. When I was investigating a similar project I soon realised that it's not just a case of buying the forks and slapping them on. It was all the peripheral stuff that had to be sourced which put me off. BTW why did you use the R1 yokes as didn't the forks slip into the existing ones?When I bought R1 forks, I bought it as a kit.]
I suspect this may well be decided by how the horns limit travel more than anything else.Next thing was to decide should I go with clip-ons or regular handlebar.
Looking good though
Andy B
- El Vikingo Tropical
- On the Road
- Posts: 204
- Joined: 8 years ago
Re: Project Polar-Raptor
Nice to hear from your beautiful project again!
I'm involved in five bike projects this time and I'm also using the complete running gear from the donner bikes as it's make everything easier
I'm involved in five bike projects this time and I'm also using the complete running gear from the donner bikes as it's make everything easier
Saludos desde Canarias